What circuit boards do we do? (21)
TMM10 High Frequency PCB
Introduction
Rogers TMM10 thermoset microwave materials are ceramic thermoset polymer composites designed for high plated-thru-hole reliability stripline and microstrip applications.
It combines the advantages of both PTFE and ceramic substrates without being constrained by their mechanical properties and production techniques.
Features
TMM10 features a dielectric constant (Dk) of 9.20 +/- .23, allowing for more compact designs and providing the possibility of miniaturization.
With a Dissipation factor of .0022 at 10GHz, TMM10 minimizes signal loss for efficient performance.
Its thermal coefficient of Dk of -38 ppm/°K enhances stability across temperature variations.
The coefficient of thermal expansion is 21 ppm/°K on X and Y axis, 20 ppm/°K on Z direction, the copper matched CTE allows for production of high reliability plated through holes, and low etch shrinkage values.
Furthermore, the thermal conductivity of TMM10 is 0.76 W/mK, which is approximately twice that of traditional PTFE/ceramic laminates, facilitating heat removal.
TMM10 offers mechanical properties that effectively resist creep and cold flow, ensuring long-term stability in diverse applications.
PCB Capability
| PCB Material: | Ceramic, Hydrocarbon, Thermoset Polymer Composites |
| Designation: | TMM10 |
| Dielectric constant: | 9.20 ±0.23 |
| Layer count: | Single Layer, Double Layer, Multilayer, Hybrid PCB |
| Copper weight: | 1oz (35µm), 2oz (70µm) |
| PCB thickness: | 15mil (0.381mm), 20mil (0.508mm), 25mil (0.635mm), 30mil(0.762mm), 50mil (1.27mm), 60mil (1.524mm), 75mil(1.905mm), 100mil (2.54mm), 125mil (3.175mm), 150mil (3.81mm), 200mil (5.08mm), 250mil (6.35mm), 275mil (6.985mm), 300mil (7.62mm), 500mil (12.70mm) |
| PCB size: | ≤400mm X 500mm |
| Solder mask: | Green, Black, Blue, Yellow, Red etc. |
| Surface finish: | Bare copper, HASL, ENIG, Immersion Silver, Immersion Tin, ENEPIG, Pure Gold, OSP etc.. |
At Bicheng, we pride ourselves on our advanced manufacturing capabilities for TMM10 laminates, offering a wide range of options to meet diverse project requirements.
We are able to provide you with single-layer, double-layer, multilayer, and hybrid PCBs, ensuring flexibility and customization for various applications.
Copper weights of 1oz (35µm) and 2oz (70µm) are available to accommodate different performance needs.
The PCB thickness options range from 15mil (0.381mm) to an impressive 500mil (12.70mm), allowing us to support both compact and robust designs.
Our PCB size capability extends up to 400mm x 500mm, making us well-equipped for larger projects.
We offer a variety of solder mask colors including green, black, blue, yellow, and red, alongside multiple surface finishes such as bare copper, HASL, ENIG, immersion silver, immersion tin, ENEPIG, pure gold, and OSP.
Applications
The TMM10 PCB is commonly used in various applications, including chip testers, dielectric polarizers, satellite communication systems, GPS antennas, and patch antennas etc.
Thank you for watching. I’ll see you next time.
|
|
TMM10 RF substrate built for Single Layer, Double Layer, Multilayer, Hybrid PCB Images
|
